Waterslide Decal Paper – White (Pack of 10)

How to Print on Decal Paper:
– Edit the images or photos which you want to print on the decal paper.
– Load your printer with your laser water-slide decal paper.
– Print the image from your computer onto your laser water-slide decal paper with your laser printer.

How to Use Waterslide Decals/Transfers on Polymer Clay:
Step 1 : Prepare your polymer clay base.Eg. condition, cut/shape, bake and cool.
Step 2 : Sand the surface of your polymer pieces. The decal will adhere more effectively on a smooth, flat surface.
Step 3 : Take your decal and on the back, trace around the baked clay piece/s with a pencil. Remember to flip the piece if it is not symmetrical as it will be mirrored once you turn it right side up.
Step 4: Cut around the pencil outline you have just traced on the inside of the line.
Step 5. Place the decal, face up, in water for approx. 60 seconds or until the backing paper starts to slide away from the decal.
Step 6. Slide the decal (face up) off the backing paper and onto the prepared surface of your baked polymer clay.
Step 7. With your finger (or a rubber squeegee) gently push out any bubbles from under the decal.
Step 8. Allow to fully dry (out of direct heat and sunlight) or you can lightly pat dry with a lint free cloth. Ensure you do this carefully and use a light touch so you don’t damage the decal.
Step 9. Once dry, re-bake the polymer and decal at 80 – 100°C for 15 minutes to cure the decal.
Step 10. Seal with your preferred polymer-compatible varnish/sealant or resin.

** Photos are examples of some of our designs on the white decal paper used on polymer clay.